9 datasets found

The data consist of hourly observations of sedimentation impacts located approximately 31 m southwest of the drilling location, including measurements of proxies of suspended...

As during the previous field trip, a SEAGUARD recording current meter (AADI, Norway) was used to monitor current speed and direction, temperature, salinity/conductivity,...

Recording of data was approximately 30 cm above the sediment surface. Sites were located between ~15 and 20 m water depth at a temperature of 19°C.

SEAGUARD recording current meter was used to monitor current speed and direction, temperature, salinity/conductivity, pressure, turbidity and oxygen concentrations within the...

Measurements were made every 30 seconds but values reported here are resampled to match the sampling rate (1 minute) of the imaging system on the lander, so that each image can...

Measurements were made every 10 minutes but values reported here are repeated to match the sampling rate (1 minute) of the imaging system on the lander, so that each image can...

Measurements were made every 5 minutes but values reported here are repeated to match the sampling rate (1 minute) of the imaging system on the lander, so that each image can be...

Measurements were made every 5 minutes but values reported here are repeated to match the sampling rate (1 minute) of the imaging system on the lander, so that each image can be...

Measurements were made every 30 seconds but values reported here are resampled to match the sampling rate (1 minute) of the imaging system on the lander, so that each image can...