-
(Table 1) Experimental shear strength values for IODP Exp315 and Exp316 holes
We investigate the mechanics of slope failures on the Nankai accretionary complex offshore Japan in the vicinity of a major out-of-sequence thrust fault (termed the... -
Geotechnical data for Hole PRGL1-4 from PROMESS1 cruise
Depth = uncorrected core depth -
Geotechnical data for Hole PRAD2-3 from PROMESS1 cruise
Depth = uncorrected core depth -
Geotechnical data for Hole PRAD2-6 from PROMESS1 cruise
Depth = uncorrected core depth -
(Table 2) Vertical effective stress and pore pressure parameter for ODP Site ...
This dataset has no description
-
(Table 1) One-dimensional consolidation test summary for ODP Site 131-808
This dataset has no description
-
(Table 1) Yield and strength testing program of ODP Site 131-808 sediments
This dataset has no description
-
(Tables T9-T13) Vertical effective stress, porosity and void ratio test resul...
This dataset has no description
-
(Tables T4-T8) Vertical effective stress, porosity and void ratio test result...
This dataset has no description
-
(Table 3) Correction of previously applied stress for the pore-pressure effec...
This dataset has no description
-
(Tables T38,T40,T44,T46,T50,T52) Ko-consolidated undrained test results and c...
All stresses / pressures were originally measured in ksc (kgf/cm**2). The conversion of ksc to SI units is 1 ksc = 98.07 kPa. Tables T42, T48, T54 and T56 have been omitted... -
(Table T37) Ko-consolidated undrained test conditions and properties of undra...
All stresses / pressures were originally measured in ksc (kgf/cm**2). The conversion of ksc to SI units is 1 ksc = 98.07 kPa. -
(Table T36) Ko-consolidated undrained test conditions and consolidation prope...
All stresses / pressures were originally measured in ksc (kgf/cm**2). The conversion of ksc to SI units is 1 ksc = 98.07 kPa. Test samples TX641, TX644, TX647 and TX650 were... -
(Tables T18-T35) Constant rate of strain consolidation properties of ODP Site...
All stresses / pressures were originally measured in ksc (kgf/cm**2). The conversion of ksc to SI units is 1 ksc = 98.07 kPa. Tables T22 and T30 are not included because of... -
(Table 2) Shear strength to vertical stress ratios of ODP Leg 113 samples
This dataset has no description
-
(Table 1) Consolidation test of ODP Leg 113 samples
This dataset has no description
-
(Table 2) Triaxial stress conditions ans shear strength parameters of ODP Leg...
This dataset has no description
-
(Table 3) Total and effective stress and fluid pressure for experiment sample...
This dataset has no description
-
(Table 2) Compression and expansion indices of ODP Site 174-1073
This dataset has no description
-
(Table 1) Results of consolidaten tests for ODP Hole 131-808C and DSDP Hole 8...
Uniaxial reconsolidation tests were conducted on samples from four whole-round cores of similar hemipelagic silty mudstones from the Shikoku Basin sequence recovered at DSDP...