XRF of Cuttings of the KTB Main Hole HB1.

DOI

Cuttings were crushed in a tungsten carbide ball mill for 25 min; while core samples were crushed in a tungsten carbide jaw breaker and then processed in the same way as the chip material. The resulting powder samples (max 0.06 mm size) were dried at 105°C, 3 gr selected and mixed with 2.5% Moviol solution and finally pressed under 40 kN into alumina rings. These standardized pellets were used for both, XRD and XRF measurements. For the determination of major and trace elements a fully automated wavelenght-dispersive XRF device (SIEMENS SRS 303 AS) was used in the field laboratory. The standard measuring operation comprised 11 major elements (SiO2, TiO2, Al2O3, Fe2O3 total, MnO, MgO, CaO, Na2O, K2O, P2O5, S) and 12 traces (Rb, Sr, Y, Zr, Nb, Cr, Ni, Zn, V, Cu, Th, U). Element concentrations were calculated by setting up calibration curves computed with more than 40 international natural rock standards.

Identifier
DOI https://doi.org/10.1594/GFZ.SDDB.1221
Metadata Access http://doidb.wdc-terra.org/oaip/oai?verb=GetRecord&metadataPrefix=oai_datacite&identifier=oai:doidb.wdc-terra.org:150
Provenance
Creator KTB, WG Geochemistry
Publisher Deutsches GeoForschungsZentrum GFZ
Publication Year 2010
OpenAccess true
Contact www.icdp-online.org/contact
Representation
Language English
Resource Type Dataset
Format text/tab-separated-values
Size 69720 DataPoints
Discipline Scientific drilling
Spatial Coverage (12.192 LON, 49.588 LAT)